Stihl MS 362 C-M - Holding and Controlling the Power Tool

Page 9
Technical Information 04.2013
TI_04_2013_30_01_01.fm
4.6 Tightening Torques
All other tightening torques remain as before and
are listed in the STIHL MS 362 service manual.
1
1
5902TI054 KN
3
2
Item Fastener Thread size Component(s) Torque Qty. Remarks
1 Screw M4x20 Control unit / crankcase 35 lbf in
(4.0 Nm)
21)
2 Screw M3x8 Wiring harness / control unit /
clamp
4.0 lbf in
(0.5 Nm)
1
3 Screw M2.5x16 Switch unit / carburetor 9.0 lbf in
(1.0 Nm)
1
Remark
1) Coat micro-encapsulated screws with medium strength Loctite 243 before reinstalling.