Stihl MS 362 C-M - Before Starting

Technical Information 04.2013
Page 8
TI_04_2013_30_01_01.fm
4.4 Switch Unit
4.4.1 Removing the Switch Unit
. Remove the shroud, air filter and baffle.
. Swing the filter base forward in direction of
handle.
. Loosen the screw (1) and pull away the switch
unit (2).
. Remove the connector (3) upwards.
. Press down the locking tab (arrow) and
separate the connector.
4.4.2 Installing the Switch Unit
. Push the switch unit (2) onto the carburetor.
. Tighten screw (1) carefully to 9.0 lbf. in
(1.0 Nm).
. Fit the connector (3) and the close the
connector (arrow).
. Assemble all other parts.
4.5 Serial Number
The serial number is located on the side of the
crankcase.
5902TI050 KN
1
2
3
5902TI051 KN
5902TI052 KN
1
2
3
0001TI007 KN