To Next PageTo Next Page
Need help?Do you have a question about the Stihl MS 380 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Chain oil automatic | Yes |
| Chain pitch | 3/8" |
| Displacement | 72.2 cm³ |
| Power Output | 4.4 kW |
| Bar Length | 40 cm |
General safety rules for operating the chainsaw and user responsibilities.
Details crucial safety practices for fueling the chainsaw.
Lists essential checks before starting the engine, including assembly, chain brake, and spark plug.
Details the steps for safely starting the engine, including location and hand guard use.
Explains kickback causes and techniques to reduce the risk.
Explains hazards like pull-in, pushback, and safe practices for different cutting scenarios.
Covers training, regulations, and planning escape paths for felling.
Highlights situations requiring extreme caution, like leaners, blowdown, or near utilities.
Explains matching chain pitch, drive link gauge, and guide bar groove for proper installation.
Guides on how to tension the saw chain correctly during use.
Explains how to check chain tension for safety and proper operation.
Details gasoline octane requirements and recommended two-stroke engine oils.
Provides mix ratios for STIHL and other oils, and safety for mixing fuel.
Explains how to check chain lubrication and the importance of not running dry.
Details how to engage and disengage the chain brake for safety.
Explains how to check the chain brake's proper function before operation.
Details safe methods for starting the chainsaw, including hand placement and pulling the rope.
Provides steps to take if the engine does not start due to a flooded condition.
Advises on checking and adjusting chain tension during operation and when cold.
Guides on setting the carburetor without a tachometer for optimal performance.
Explains how to fine-tune the carburetor using a tachometer for precise engine speed.
Details how to adjust idle speed correctly to prevent chain rotation.
Guides on checking, cleaning, and replacing the spark plug for engine performance.
Covers benefits of sharp chains, angles, and recommended sharpening tools.
Guides on checking and filing chain angles and adjusting depth gauge settings.
