Stihl MS 462 C-M - User Manual

STIHL MS 462 C-M
Instruction Manual
Notice d’emploi

Stihl MS 462 C-M Specifications

General

Idle speed	- RPM
Chain pitch	3/8 \
Blade length	710 mm
Product color	Black, Grey, Orange
Chain tensioner	Yes
Engine displacement	72.2 cm³
Power source	Gasoline
Sound power level	119 dB
Vibration emission	4.8 m/s²
Sound pressure level	108 dB

Summary

Introduction

Guide to Using this Manual

Provides guidance on how to use the manual effectively, including signal words and symbols.

Signal Words

Explains the signal words used in the manual to highlight important safety information.

Symbols in Text

Details the symbols used within the manual to aid in understanding instructions and references.

Main Parts

Chain Saw

Identifies and illustrates the main components of the STIHL MS 462 C-M chain saw.

Safety Symbols on the Product

Chain Saw

Explains the safety symbols found on the STIHL chain saw for user awareness and hazard identification.

IMPORTANT SAFETY INSTRUCTIONS

Intended Use

Details the specific purpose and approved applications for the STIHL chain saw.

Operator

Covers operator health, physical condition, and responsibilities for safe operation, including fatigue and substance use.

Personal Protective Equipment

Specifies essential protective gear for safe operation, including eye, hearing, head protection, and clothing.

Chain Saw

Highlights critical safety measures related to chain saw operation, handling, and immediate hazards.

Fueling Instructions

Provides detailed safety guidelines for fueling the chain saw, including location, pressure relief, and fire prevention.

Using the Chain Saw

Offers instructions and warnings on the safe operation and handling of the chain saw, including assembly and tensioning.

Kickback and Other Reactive Forces

Reactive Forces

Explains the dangerous forces generated during chain rotation and their potential for serious or fatal injury.

Kickback

Details the causes, mechanisms, and severe risks associated with kickback incidents.

Pull-in

Describes pull-in, a reactive force where the chain pulls the saw forward, causing loss of control.

Pushback

Explains pushback, where the chain stops suddenly, driving the saw rapidly back towards the operator.

Proper Techniques for Basic Bucking, Limbing, Pruning and Felling

Bucking

Provides guidance on safely cutting logs into sections, addressing rolling logs and support.

Cutting Logs Under Tension

Details precautions for cutting logs with internal tension to prevent pinching and sudden release.

Limbing

Explains the process of removing branches from a fallen tree, including safety tips for kickback and falling limbs.

Pruning

Covers techniques for selectively removing branches from a standing tree, emphasizing safety and proper cuts.

Felling

Outlines considerations for cutting down trees, including factors affecting fall direction and escape paths.

Maintenance, Repair and Storage

Warnings and Instructions

Highlights critical safety warnings and general instructions for maintenance, repair, and storage procedures.

Before Starting Work

Preparing the Chain Saw for Operation

Lists essential checks and preparations before operating the chain saw.

Assembling the Chain Saw

Cutting Attachment

Explains the components of the cutting attachment and the importance of matching parts for safety and function.

Mounting and Removing the Guide Bar and Chain

Provides step-by-step instructions for attaching and detaching the guide bar and saw chain.

Tensioning the Chain

Details the procedure and importance of correctly tensioning the saw chain for safe operation and performance.

Lubricating the Saw Chain and Guide Bar

Bar and Chain Lubricant

Explains the function and types of lubricant required for the saw chain and guide bar for optimal performance.

Adjusting the Flow of Bar and Chain Oil

Guides on how to set the oil pump for optimal lubrication based on conditions and usage.

Filling the Chain Oil Tank

Provides instructions on how to safely open and refill the chain oil tank.

The Chain Brake

Engaging the Chain Brake

Explains how to manually engage the chain brake for safety and operational purposes.

Disengaging the Chain Brake

Details the procedure for safely disengaging the chain brake before starting the engine.

Maintaining the Chain Brake

Outlines the importance of proper maintenance for the chain brake's effectiveness and safety.

Mixing Fuel and Refueling the Chain Saw

Mixing Fuel

Provides instructions and safety precautions for mixing gasoline and 2-cycle oil for the engine.

Refueling the Chain Saw

Details the safe procedure for refueling the chain saw, including pressure relief and fire prevention.

Starting the Engine

Holding the Chain Saw

Illustrates and describes the correct methods for firmly holding the chain saw during starting.

Starting the Engine

Provides a step-by-step guide for safely starting the engine, including safety checks and procedures.

Shutting Off the Engine

Shutting Off the Engine

Explains the procedure for safely stopping the engine and securing the chain saw.

Checking the Chain Saw

Checking the Operation of the Chain Brake

Details how to test the chain brake's functionality before each use.

Testing the Controls

Guides on checking the throttle trigger and lockout for proper operation.

Testing Chain Lubrication

Explains how to verify that the chain lubrication system is functioning correctly.

Adjusting the Carburetor

STIHL M-Tronic Engine Management System

Describes the electronic engine management system that optimizes performance automatically.

Calibrating the Chain Saw

Provides steps for calibrating the engine management system for optimal performance.

Winter Operation

Explains how to set the shutter for cold weather operation to prevent carburetor icing.

Summer Operation

Details how to set the shutter for warm weather operation to prevent engine overheating.

After Finishing Work

Preparing for Transportation or Storage

Outlines steps for safely preparing the chain saw for transport or long-term storage.

Transporting

Transporting the Chain Saw

Provides guidelines for safely transporting the chain saw by hand or in a vehicle.

Storing

Storing the Chain Saw

Details procedures for short-term and long-term storage of the chain saw to prevent damage and unauthorized use.

Cleaning

Cleaning the Chain Saw

Provides instructions for cleaning the saw's body, shroud, and around the sprocket cover.

Cleaning the Guide Bar and Saw Chain

Details the process for cleaning the guide bar, its oil channels, and the saw chain.

Cleaning the Air Filter

Explains how to clean the air filter to maintain proper engine airflow and performance.

Cleaning the Spark Plug

Guides on how to clean or replace the spark plug for optimal engine ignition.

Inspection and Maintenance

Inspection and Maintenance Chart

Provides a schedule of regular inspections and maintenance tasks for the chain saw.

Inspecting and Maintaining the Chain Saw

Covers general inspection and maintenance activities for the entire chain saw, including spark plug and filters.

Inspecting and Maintaining the Chain Sprocket

Details how to inspect the chain sprocket for wear and when to replace it.

Inspecting and Maintaining the Guide Bar

Explains how to check the guide bar for wear and damage, and how to maintain it.

Inspecting, Maintaining and Sharpening the Saw Chain

Covers critical aspects of chain maintenance, including sharpening, depth gauge adjustment, and wear checks.

Troubleshooting Guide

Chain saw

Offers solutions for common performance issues and troubleshooting steps for the chain saw, such as starting or idling problems.

Specifications

CEPA

Provides information on the Emission Compliance Period for the engine.

STIHL MS 462 C-M

Lists key technical specifications for the STIHL MS 462 C-M model, including displacement and power.

Chain Sprockets

Details the available chain sprocket options for the chain saw.

Minimum Groove Depth of Guide Bars

Specifies the minimum required groove depth for guide bars based on pitch.

Depth Gauge Setting

Indicates the correct depth gauge setting for different chain pitches.

Symbols on the Chain Saw

Explains various symbols and markings found on the chain saw and their meanings.

Engineering Improvements

Notes that product improvements may not be reflected in the manual and advises contacting dealers for updates.

CSA Standard

Chain Saw Class

Classifies the gasoline-powered chain saw according to CSA Z62.1 standards.

Definition of the Chain Saw Classes according to CSA Z62.1

Defines various classes of chain saws based on power source and intended use.

Combinations of Guide Bars and Saw Chains

STIHL MS 462 C-M

Lists compatible guide bar and saw chain combinations for the STIHL MS 462 C-M.

Replacement Parts and Equipment

Genuine STIHL Replacement Parts

Emphasizes the use of genuine STIHL parts for optimal performance and safety.

Disposal

Disposal of the Power Tool

Provides instructions on environmentally friendly disposal of the chain saw and accessories.

Emission Control Warranty

STIHL Limited Federal Emission Control Warranty Statement

Outlines the warranty terms and conditions for the engine's emission control system.