Need help?Do you have a question about the Stihl MS 720 and is the answer not in the manual?
Specifies required protective clothing and equipment for safe operation.
Pre-operation checks for assembly, condition, and safety features.
Safe procedures for starting the chain saw on a level surface with firm footing.
Guidelines for safe operation, including maintaining footing, firm grip, and immediate engine shutdown.
Description of kickback and its potential to cause fatal cuts.
Methods to minimize kickback, including proper grip, throttle use, and chain maintenance.
Describes the 'pull-in' reactive force where the saw is driven forward toward the log.
Describes the 'pushback' reactive force where the saw is driven backward toward the operator.
Steps for preparing the felling area, ensuring safety for people and property.
Clearing the work area and tree base for secure footing and to prevent damage to the saw chain.
Instructions on making the felling notch to determine the direction of fall.
Detailed instructions on how to prepare the felling notch correctly.
Steps for making the felling notch, including horizontal and angled cuts.
Key information and diagrams related to making the felling cut.
Proper use of felling wedges to control tree fall and avoid damage.
Specific felling cut method for normal trees using a stabilizing strap.
How to adjust chain tension while cutting to maintain optimal performance.
Instructions and warnings regarding the correct mixture ratio of gasoline and engine oil.
Procedure for safely filling the fuel tank without spilling or overfilling.
Procedure for filling the chain oil tank to ensure proper chain lubrication.
Detailed instructions for starting and stopping the engine.
Detailed steps for starting the engine, including choke and decompression valve use.
Procedure for setting the starting throttle position and engaging the starter rope.
Actions to take when the engine fires but doesn't run continuously.
Steps to take immediately after the engine starts running, like releasing controls.
Troubleshooting steps if the engine fails to start, including flooded carburetor checks.
General operating advice, including mixture settings and chain tension checks.
Importance of regularly checking and adjusting chain tension.
Steps to take after completing work, including slackening the chain.
Maintenance procedures for the guide bar to ensure optimal cutting performance and longevity.
Procedure for cleaning the air filter to maintain engine performance and efficiency.
Instructions for adjusting the carburetor for optimal engine performance at different conditions.
Procedure for adjusting the idle speed for smooth engine operation.
Troubleshooting steps if the engine stalls when idling.
Troubleshooting steps if the saw chain moves while the engine is idling.
Diagnosing and correcting engine performance issues like erratic idling or poor acceleration.
Correct angles for sharpening saw chain cutters to ensure performance and safety.
Detailed guidance on the correct technique for sharpening saw chains.
Guidance on performing maintenance and repairs, recommending authorized dealers.
To Next Page
General
