MSA 160 C, MSA 200 C
English
40
Otherwise the drive links will grind
against the base of the groove – the
bottoms of the cutters and the tie straps
will not lie against the bar.
N Set hand guard to ƒ
N Remove battery
N Turn over the machine and shake it
out – remove chips from the battery
compartment
N Remove saw chain and guide bar;
clean and spray with protective oil
N Thoroughly clean the machine,
especially the ventilation slots
N When using biological chain oil
(e. g., STIHL BioPlus), fill the
lubricant oil tank
N Store the machine in a dry and safe
place, out of the reach of children
and other unauthorized users
Battery compartment cover
In some countries, the machine is
equipped with a cover for the battery
compartment. This keeps dirt out of the
battery compartment.
N After work, insert the cover (1) in the
compartment until the cover audibly
snaps into place
Battery storage
N Remove the battery from the
machine or charger
N Store in a closed, dry space and
keep in a secure location. Protect
against unauthorized use (e. g., by
children) and dirt
N Do not store backup batteries
unused – use them in alternation
For optimum service life:
N Store at temperatures of 50 °F
(10°C) to 68°F (20°C)
N Store at a charge state of
approx. 30 %
Storing the charger
N Remove battery
N Disconnect the mains plug
N Store charger in a closed, dry space
and keep in a secure location.
Protect against unauthorized use
(e. g., by children) and dirt
Storing the Machine
To Next Page
Loading...
