MSA 160 C, MSA 200 C
English
46
All accessible screws, nuts and bolts Retighten X
Chain catcher
Check X
Replace X
Safety information label Replace X
1)
STIHL recommends STIHL servicing dealers
The following information applies under normal operating conditions. The specified intervals must be
shortened accordingly when working for longer than normal each day or under difficult conditions
(extensive dust, highly resinous lumber, lumber from tropical trees, etc.). If the machine is only used
occasionally, the intervals can be extended accordingly.
Always set the hand guard to
ƒ and remove the battery before starting any work on the chain saw.
Before starting work
At the end of work and/or
daily
Each time the battery is
changed
Weekly
Monthly
Yearly
If faulty
If damaged
As required
To Next Page
Loading...
