Stihl RB 200 - User Manual

Questions and Answers

A
Angela ThompsonAug 4, 2025
What to do if my Stihl RB 200 Pressure Washer is not dispensing detergent?
- A
  Adrienne WatkinsAug 5, 2025
  If your Stihl Pressure Washer isn't dispensing detergent, consider the following: * The detergent tank may be empty. Fill the detergent tank. * The suction hose or suction intake filter may be clogged. Clear any blockages. * The injector could be dirty or clogged. Clean the injector. * The detergent nozzle or low-pressure nozzle might be missing or clogged. Insert or clean the nozzle.
S
Steven HerreraAug 9, 2025
Why is water leaking from the thermal relief valve on my Stihl RB 200 Pressure Washer?
- J
  joseph36Aug 9, 2025
  Water may come out of the thermal relief valve on your Stihl Pressure Washer if: the water temperature is too high. Avoid running the pressure washer for more than 2 minutes without actively spraying. Also, the thermal relief valve may be leaking and need to be repaired.
R
Robin JohnsonAug 13, 2025
Why is oil leaking from the high-pressure pump of my Stihl Pressure Washer?
- M
  Morgan ProctorAug 13, 2025
  If oil is leaking from the high-pressure pump of your Stihl Pressure Washer, it indicates that the high-pressure pump is leaking and needs to be repaired.
R
Robert WilliamsAug 17, 2025
Why is water coming out of the thermal relief valve on my Stihl RB 200 Pressure Washer?
- L
  Lauren MaddenAug 17, 2025
  If water is coming out of the thermal relief valve on your Stihl Pressure Washer, it could be due to: * **High Water Temperature:** Avoid running the pressure washer for more than 2 minutes without actively spraying. * **Leaking Valve:** Have the thermal relief valve repaired if it is leaking.
N
Nancy FosterAug 22, 2025
Why is oil coming out of my Stihl RB 200 Pressure Washer pump?
- T
  Timothy PattonAug 22, 2025
  If oil is coming out of the high-pressure pump of your Stihl Pressure Washer, it is likely that the high-pressure pump is leaking and requires repair.
R
randy25Oct 26, 2025
Why is there no water coming from my Stihl RB 200 nozzle?
- A
  aimeediazOct 26, 2025
  There could be several reasons why your Stihl Pressure Washer isn't spraying water or has low water pressure: * A kink in the water or high-pressure hose. Remove any kinks, or replace the high-pressure hose. * Insufficient water supply. Fully open the water tap and check the diameter and length of the intake hose. * Low engine speed. Run the engine at full throttle or have it repaired. * Clogged water intake screen. Clean the water intake screen. * Air in the system. Vent the system by briefly activating the spray gun several times. * Air being drawn into the high-pressure pump. Check and seal all connections in the water intake if necessary. * Clogged or worn high-pressure nozzle. Clean or replace the nozzle. * Worn valves or gaskets in the high-pressure pump. Have the p...
T
Thomas TurnerOct 30, 2025
Why is there no water coming from my Stihl RB 200?
- J
  jonathan92Oct 30, 2025
  If you're experiencing no or too little water coming from the high-pressure nozzle and pressure drops or fluctuates in your Stihl Pressure Washer, here are a few things to check: * **Kinks:** Make sure the water hose isn't kinked. Remove any kinks you find. Also, inspect the high-pressure hose and replace it if kinked. * **Water Supply:** Ensure you have enough water coming in. Open the water tap completely and check the diameter and length of the intake hose. * **Engine Speed:** The engine should run at full throttle. Have it repaired if necessary. * **Clogged Screen:** Clean the water intake screen located at the inlet of the high-pressure pump. * **Air in System:** Vent the system by repeatedly actuating the spray gun at short intervals. * **Air Leaks:** Check all connectio...

Summary

Safety Precautions and Working Techniques

IMPORTANT SAFETY INSTRUCTIONS

Essential safety guidelines for operating the pressure washer.

The Pressure Washer

Unit Modifications and Damage Checks

Warnings against modifying the unit and checks for damage before use.

Fuel Handling and Safety

Precautions for handling gasoline, including fueling procedures.

Connecting the Water Supply

Backflow Prevention and Water Quality

Requirements for connecting to potable water and using clean water.

Connecting the Water Hose

Venting the System

Before Starting

Pre-start Checks and Warnings

Ensures all parts are in order and checks fuel system, spark plug, and controls.

Starting the Engine

Engine Starting Procedure

Safe starting location and rope handling instructions.

Pre-start Steps

During Operation

Holding and Controlling the Spray Attachment

How to safely hold and control the spray attachment.

Working Conditions

Operator Posture and Stability

Exhaust Fume Hazards

Risks of toxic exhaust fumes and requirements for ventilation.

Operating Instructions

Emergency Shutdown and Working Alone

Procedures for emergencies and safety of not working alone.

Muffler Safety and Modification

Engine Component Safety

Spark Arrester and Fire Risk

During Work Safety

Spraying Hazardous Materials

Warnings against spraying flammable or combustible liquids.

Fluid Injection and Cutting Injury

Risks of high-pressure fluid penetrating skin and causing injury.

Electrical and Property Damage Safety

Avoiding Electrical Hazards

Maintenance, Repair, and Storing

Warranty and Approved Parts

Maintenance and Repair Guidelines

Warnings about performing maintenance, using authorized dealers, and cleaning methods.

Before the First Use

Handle Installation

Hose and Nozzle Connections

Connecting and Removing the High-Pressure Hose

Connection to the High-Pressure Pump

Procedure for connecting the high-pressure hose to the pump.

Removing Hose from Pump

Steps for safely removing the high-pressure hose from the pump.

Connection to the Spray Gun

Connecting Hose to Spray Gun

Removing Hose from Spray Gun

Inserting and Removing the Spray Nozzle

Selecting the Appropriate Spray Nozzle

Inserting the Spray Nozzle

Step-by-step guide to attaching a spray nozzle.

Removing the Spray Nozzle

Steps for safely detaching a spray nozzle from the lance.

Working

Actuating the Spray Gun

How to operate the spray gun trigger for spraying.

Standby Mode and Engine Shutdown

Adding Detergent

Detergent Suction and Nozzle Use

Shutting off the Engine

Engine Shutdown Procedure

Maintenance and Care

Maintenance Schedule and Intervals

Table outlining maintenance tasks and their frequency.

Cleaning and Inspection Tasks

Specific cleaning and inspection duties for the unit and components.

Maintenance

General Maintenance Work

High-Pressure Pump Maintenance

Specifications

Engine Specifications

High-Pressure Pump Specifications

Specifications (cont.)

Troubleshooting

High-Pressure Pump Issues

Common problems with water flow, pressure drops, and pump operation.

Troubleshooting (cont.)

Thermal Relief Valve and Oil Leaks

Detergent Supply Issues

Engine Starting and Running Problems

Causes and remedies for the engine not starting or running roughly.

Maintenance and Repairs

Authorized Service and Parts

Stihl RB 200 Specifications

General

Water Pressure	2500 PSI
Hose Length	25 ft
Weight	62 lbs
Engine	Kohler RH265
Power Source	Gasoline
Engine Displacement	196 cc
Maximum Pressure	2500 PSI
Nozzle Included	Yes