RB 200
English
18
See the Kohler owner's manual for
complete instructions on shutting off the
engine.
N Shut off the engine
N Turn off the water supply
N Squeeze and hold the spray gun
trigger until water only drips from the
high-pressure nozzle and the
system is depressurized
N Release the spray gun trigger (2)
and engage the trigger lockout (1)
N Disconnect the water hose
N Disconnect the high-pressure hose
N Roll up the high-pressure hose and
hang it on the holder
N Remove the high-pressure nozzle
from the spray lance and attach it to
the integrated holder on the frame
N Place the spray attachment in the
holder
N Wipe down the pressure washer
with a damp cloth
N Store the pressure washer indoors
in a dry room
NOTICE
Freezing temperatures can damage
components of the pressure washer.
Store the pressure washer indoors in a
dry room where it is protected from
freezing temperatures.
Frost protection / corrosion protection
If the pressure washer cannot be stored
in a room where it is protected from
freezing temperatures, carry out the
following tasks:
N Drain the water out of the high-
pressure hose
N Disconnect the spray lance from the
spray gun
N Point the spray lance downward
and wait until all the water has
flowed out
N Point the spray gun downward,
squeeze the spray gun trigger and
wait until all the water has flowed
out
N Connect a container with anti-freeze
either directly or with a suction hose
to the water inlet of the high-
pressure pump
Shutting off the Engine
After Finishing Work
0000-GXX-0310-A0
Storing the Machine
To Next Page
Loading...
