What to do if my Stihl RB 400 is not dispensing detergent?
If your Stihl Pressure Washer isn't dispensing detergent, consider the following: * The detergent tank may be empty. Fill the detergent tank. * The suction hose or suction intake filter may be clogged. Clear any blockages. * The injector could be dirty or clogged. Clean the injector. * The detergent nozzle or low-pressure nozzle might be missing or clogged. Insert or clean the nozzle.
How to fix detergent not dispensing on Stihl RB 400 Pressure Washer?
If your Stihl Pressure Washer isn't dispensing detergent, consider these possible causes: * The detergent tank is empty: Fill the detergent tank. * The suction hose or suction intake filter is clogged: Eliminate the clog. * The injector is dirty or clogged: Clean the injector. * The detergent nozzle or low-pressure nozzle is not inserted or is clogged: Insert or clean the detergent nozzle or low-pressure nozzle.
Why is water leaking from the thermal relief valve on my Stihl Pressure Washer?
Water may come out of the thermal relief valve on your Stihl Pressure Washer if: the water temperature is too high. Avoid running the pressure washer for more than 2 minutes without actively spraying. Also, the thermal relief valve may be leaking and need to be repaired.
Why is oil leaking from the high-pressure pump of my Stihl RB 400 Pressure Washer?
If oil is leaking from the high-pressure pump of your Stihl Pressure Washer, it indicates that the high-pressure pump is leaking and needs to be repaired.
What to do if water comes out of the thermal relief valve on Stihl Pressure Washer?
If water is coming out of the thermal relief valve of your Stihl Pressure Washer, it may be due to the water temperature being too high. To resolve this, avoid running the pressure washer for more than 2 minutes without actively spraying.
Why is there no water coming from my Stihl RB 400 Pressure Washer nozzle?
There could be several reasons why your Stihl Pressure Washer isn't spraying water or has low water pressure: * A kink in the water or high-pressure hose. Remove any kinks, or replace the high-pressure hose. * Insufficient water supply. Fully open the water tap and check the diameter and length of the intake hose. * Low engine speed. Run the engine at full throttle or have it repaired. * Clogged water intake screen. Clean the water intake screen. * Air in the system. Vent the system by briefly activating the spray gun several times. * Air being drawn into the high-pressure pump. Check and seal all connections in the water intake if necessary. * Clogged or worn high-pressure nozzle. Clean or replace the nozzle. * Worn valves or gaskets in the high-pressure pump. Have the p...
Why is there no water coming out of my Stihl RB 400?
If little to no water is coming from the high-pressure nozzle of your Stihl Pressure Washer, several issues could be the cause. Check for the following: * A kinked water hose: Remove any kinks. * A kinked high-pressure hose: Replace the high-pressure hose. * Water shortage: Fully open the water tap and verify the intake hose's diameter and length. * Low engine speed: Run the engine at full throttle. * Clogged water intake screen: Clean the water intake screen. * Air in the system: Vent the system by repeatedly actuating the spray gun. * The high-pressure pump drawing air: Check and seal all connections in the water intake if necessary. * A clogged or worn high-pressure nozzle: Clean or replace the nozzle. * Frozen high-pressure pump: Thaw out the high-pressure pump. * ...
Explains how symbols and text are used in the manual for instructions and illustrations.
Crucial safety warnings for operating the pressure washer to prevent injury or death.
Details physical and mental requirements for the operator, including health and fatigue.
Specifies essential protective apparel, including eye and hearing protection, and footwear.
Outlines how to safely use the pressure washer, including transport and fueling.
Instructions on how to safely move the pressure washer, including securing it.
Guidelines for safe refueling, including ventilation, cooling, and spill prevention.
Checks and preparations required before operating the pressure washer to ensure safety and proper function.
Guidelines for operating the pressure washer, including handling the spray attachment and general safety.
How to grip and control the spray gun and lance due to reactive forces.
Important considerations for the operating environment, including ventilation and hazardous fumes.
Actions to take in case of imminent danger or emergency, including shutting down the unit.
Emphasizes the importance of not working alone and keeping others within calling distance.
Instructions on how to properly dispose of the product and its components according to regulations.
Information on the product's warranty policy and where to find details.
Lists the registered trademarks associated with STIHL products.
General| Hose Length | 25 ft |
|---|---|
| Weight | 29.5 lbs |
| Engine Type | 2-stroke |
| Power Output | 2.1 kW |
| Nozzles | 0°, 15°, 25°, 40°, Soap |
To Next Page
