Stihl SR 450 - Nozzle; Valve; 10.9.1 Nozzle

98 SR 430, SR 450
: Push the blower housing (1) with
the lower anti-vibration springs
into the spring seats (arrow) until
they snap into position.
: Fit and tighten down the
screws (1) firmly.
: Push the blower housing (1) with
the upper anti-vibration springs
into the spring seats (arrow) until
they snap into position.
0002RA406 TG
1
0002RA374 TG
1 1
0002RA482 TG
1
Versions with long back padding
: Fit and tighten down the
screws (1) firmly.
: Fit the back padding (1) in
position.
: Insert the screws (arrows) and
tighten them down firmly.
0002RA490 TG
1 1
0002RA487 TG
1
Versions with short back padding
: Fold down the back padding (1).
: Fit and tighten down the
screws (2) firmly.
– Reassemble all other parts in the
reverse sequence.
10.9 Nozzle / Valve
10.9.1 Nozzle
: Use a screwdriver to ease the
hose clamp (arrow) open.
– Pull off the hose (1).
0002RA373 TG
1
2 2
0002RA407 TG
1