Stihl TS 400 Technical Information

8. Repairs
The national safety regulations and the safety
instructions in the Owner’s Manual must be
observed if the Cutquik has to be started up during
repairs or maintenance work.
8.1 Repair times
The repair times specified are based on the times
required by duly trained professionals with a properly
equipped service shop.
The repair times are specified in tenths of an hour
(0.1 = 6 minutes).
Note:
The table of repair times for Cutquiks of series
TS 400 can be transferred to the STIHL table of
repair times.
Code Type of repair
1 Crankcase
2 Crankshaft and/or Bearings
3 Crankcase Gasket/Sealing
4 Crankshaft Seals
5 Cylinder and/or Piston
6 Ignition
7 Fuel Supply, Tank Vent
8 Wheel Guard
9 Carburetor
10 Arbor Housing
11 Handle Bar, Buffers, Handle Frame
12 Recoil Starter
13 Clutch
14 V Belt Pulley
15 Muffler
16 Air Filter/Filter Cover
17 Stop Switch
✂
TS 400
TS 460
2.5
2.5
1.5
1.2
1.0
0.5
0.5
0.3
0.7
0.6
0.5
0.5
0.5
0.4
0.4
0.3
0.4
0.5
0.5
0.5
Technical Information 37.95 - Page 11

Stihl TS 400 Specifications

General

Arbor Size	20 mm
Power Output	3.2 kW
Engine Type	2-stroke
Sound Pressure Level	98 dB(A)
Sound Power Level	109 dB(A)
Maximum Wheel Size	350 mm
Wheel Size	14 in.
Maximum Cutting Depth	125 mm
Cutting Depth	125 mm
Blade Diameter	14 in.
Warranty	2 years
Engine Power	3.2 kW