Technical Information 37.2007 Page 9
TI_37_2007_30_01_02.fm
1.5 Guard
The cast arm with newly developed magnesium
guard is mounted on the inboard side by the
manufacturer. Depending on requirements, the cast
arm with guard can also be remounted on the
outboard side in a matter of minutes.
Inboard mounting is recommended for free-hand
cutting due to the more advantageous center of
gravity.
1.5.1 Inboard mounting
1.5.2 Outboard mounting
1.6 Tank housing
The tank housing comprises four individual parts
welded together. It is characterized by high rigidity
and low weight.
The following functions are integrated:
. Cyclone pre-separation
. Filter base
. Fuel hose
. Tank vent
. Fuel overflow
370TI008 KN
370TI009 KN
370TI004 KN
To Next Page
Loading...
