Stihl TS 410 - Page 45

TS 410, TS 420
English
43
Antivibration elements
test, check XXX
Have them replaced by a specialist
dealer
1)
X
Abrasive wheel
test, check XX
Replace XX
Supports/rubber buffers (underneath the
machine)
test, check X
Replace XX
Warning labels Replace X
1)
STIHL recommends STIHL specialist dealers
2)
present only in some countries
The following maintenance intervals apply in normal operating conditions. The
specified intervals must be shortened accordingly when working for longer than
normal or under difficult cutting conditions (extensive dust, etc.).
before starting work at the end of work and/or daily Whenever tank is refilled Weekly Monthly Yearly if not functioning properly If damaged As required