Stihl TS 410 - Page 49

TS 410, TS 420
English
47
Abrasive wheels (TS 420)
Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers.
Warranty claims following repairs can be
accepted only if the repair has been
performed by an authorized STIHL
servicing dealer using original STIHL
replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and, in some cases, by the STIHL
parts symbol K. The symbol may
appear alone on small parts.
Composite resin abrasive wheels
Minimum outside diameter of
front thrust washer:
4.06 in.
(103 mm)
Max. depth of cut: 3.9 in.
(100 mm)
Diamond abrasive wheels
Minimum outside diameter of
front thrust washer:
4.06 in.
(103 mm)
Max. depth of cut: 3.9 in.
(100 mm)
Outside diameter: 14 in.
(350 mm)
Bore diameter/spindle
diameter:
0.787 in.
(20 mm)
Tightening torque: 22 lbf ft
(30 Nm)
Composite resin abrasive wheels
Minimum outside diameter of
front thrust washer:
4.06 in.
(103 mm)
Max. depth of cut: 4.9 in.
(125 mm)
Diamond abrasive wheels
Minimum outside diameter of
front thrust washer:
4.06 in.
(103 mm)
Max. depth of cut: 4.9 in.
(125 mm)
Special Accessories Maintenance and Repairs