TSA 230
English
34
Removing the battery
N Press both safety catches at the
same time (4) – this unlocks the
battery (5)
N Remove the battery (5) from the
housing
When the machine is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
N Set retaining latch to ƒ
N Remove the battery
N Remove the abrasive wheel
N Thoroughly clean the machine,
especially the ventilation slots
N Store machine in a safe and dry
place. Protect against unauthorized
use (e. g., by children)
NOTICE
If the battery is not removed, there is the
risk that the plug-in contacts on the cut-
off machine and battery become
corroded. Such corrosion can cause
irreparable damage to the cut-off
machine and battery.
Battery compartment cover (special
accessory)
The cover protects the empty battery
compartment against dirt.
N After work, insert the cover (1) in the
compartment until the cover audibly
snaps into place
Battery storage
N Remove the battery from the
machine or charger
N Store in a closed, dry space and
keep in a secure location. Protect
against unauthorized use (e. g., by
children) and dirt
N Do not store backup batteries
unused – use them in alternation
For optimum service life, store the
battery at a charge of approx. 30 %.
Storing the charger
N Remove the battery
N Disconnect the power plug
N Store charger in a closed, dry space
and keep in a secure location.
Protect against unauthorized use
(e. g., by children) and dirt
Storing the Machine
To Next Page
Loading...
