Stihl TSA 230 - Maintenance and Care

TSA 230
English
35
Maintenance and Care
The following maintenance intervals apply in normal operating conditions. The spec-
ified intervals must be shortened accordingly when working for longer than normal
or under difficult cutting conditions (extensive dust, etc.).
Always set the retaining latch to
ƒ and remove the battery before starting any work
on the machine.
Before starting work At the end of work and/or daily Weekly Monthly Yearly If problem If damaged As required
Complete machine
visual inspection (condition) X
Clean X
Control handles (retaining latch, trigger
switch lockout and trigger switch)
Function tests X
Clean XX
Intake port for cooling air
Visual inspection X
Clean X
All accessible screws, nuts and bolts Retighten X
Battery
Visual inspection XXX
Remove X
Battery compartment
Clean XX
Check XX
Water connection, water system
Check XX
Have them maintained by a servicing
dealer
1)
X
Abrasive wheel
Check XXX
Replace XX
Guide plate (underneath machine)
Check X
Replace
1)
XX
Safety information label Replace X
1)
STIHL recommends STIHL servicing dealers