Foreword 1
Your truck
brake until it comes to a standstill. A parking
brake ensures that the truck remains securely
in place when parked.
Hydraulic system
The steering system, the lift cylinders and the
tilt cylinders in the lift mast are supplied with
power via a hydraulic pump operated by an
electric motor.
The proportional valve tec
hnology provides
particularly sensitive mo
vements and safe
handling of the load. The hy
draulic functions
can be parameterised indiv
idually by the
authorised service centr
e.
Uptothreehydrauliccircuitscanbeusedto
activate attachments (variant). Depending on
the equipment, a hydraulic accumulator is also
available in the lifting circuit for the purpose
of damping pressure peaks in the hydraulic
system.
Drive
The STILL RX60 35-50 is driven via both front
wheels by maintenance-free three-phase
drives in the front axle with 80 volt technology.
Power is supplied by lead
-acid batteries
or lithium-ion batteries.
The batteries are
located at the side of the t
ruck to enable easy
replacement. In both case
s, the trucks can be
supplied as a cold store
variant.
The driver can help to influence the energy
consumption and performance of the truck
using the "Blue-Q" efficiency mode, which
allows the required setting for each current
application to be called up via the display-
operating unit.
Steering
The kickback-free, hydraulic rear-wheel
steering with "Curve Speed Control" (CSC)
ensures driving stability when cornering,
allowing the truck to achieve a small turning
circle and negotiate narrow aisle widths.
171
533 EN - 02/2019 - 19 3
To Next Page
