4 Operation
Replacing and transporting the bat
tery
Replacing the battery using forklift
truck or pallet truck
CAUTION
Risk of damage!
The battery must only be removed on a level and
smooth floor in accordance with the operating
instructions of the truck or lift truck used.
Preparation
– Park the truck safely.
– Open the battery cover.
CAUTION
Risk of component damage!
If you remove the battery male connector when the
key switch is switched on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens their service life.
– Switch off the key switch before the battery male
connector is disconnected.
– Only disconnect the battery male connector with
the key switch switched on in an emergency.
338
171533 EN - 02/2019 - 19
To Next Page
Loading...
