Operation 4
Checks and tasks before daily use
CAUTION
The seat belt may be damaged by heat!
Do not subject the buckle or belt retractor to exces-
sive heat when thawing.
– Do not use air warmer than 60°C when thawing.
Adjusting the armrest
DANGER
There is a risk of accident if the armrest lowers sud-
denly, causing the driver to move in an uncontrolled
manner. This can result in unintentional actuation
of the steering or the operating devices and thus
cause uncontrolled movements of the truck or load.
– Do not adjust the armrest while driving.
– Adjust the armrest so that all operating devices
canbeactuatedsafely.
– Ensure that the armrest is securely tightened.
7331_342-001
3
1
2
Adjusting the length of the armrest
– Release the star-grip handle (1) by turning
it anti-clockwise.
– Shift the armrest (2) into the desired posi-
tion.
– Tighten the star-grip handle by turning it
clockwise.
– Check that the armrest is firmly attached.
Adjusting the height of the armrest
– Release hand wheel (3) by turning it anti-
clockwise.
– Shift the armrest (2) into the desired posi-
tion.
– Tighten the hand wheel by turning it clock-
wise.
– Check that the armrest is firmly attached.
171
533 EN - 02/2019 - 19 85
To Next Page
