Operation 4
Handling the lead-acid battery
Battery weight and dimensions
DANGER
Risk of tipping due to change in battery weight!
The battery weight and dimensions affect the sta-
bility of the truck. When replacing the battery, the
weight ratios must not be changed. The battery
weight must remain within the weight range speci-
fied on the nameplate.
– Do not remove or change the position of ballast
weights.
– Note the battery weight.
Performing battery maintenance
The cell covers of the battery must be kept dry
and clean.
Terminals and cable shoes must be clean,
lightly coated with battery grease and screwed
on tightly.
– Neutralise any spilt battery acid immedi-
ately.
– Observe the safety regulations for handling
battery acid; see the chapter entitled
"Battery acid".
171
533 EN - 02/2019 - 19 307
To Next Page
Loading...
