Checking the air pressure
NOTE
The correct air pressure for pneumatic tyres
(variant) is determined by the type of tyre
used. The air pressure measured must corre-
spond to the manufacturer's information.
– Observe the air pressure value indicated on
the adhesive label (1) on the truck.
– Check the air pressure of all four tyres and
compare with the air pressure values stated
on the adhesive labels.
– Add or release air as required if the air
pressure deviates from the values stated.
Checking wheel fastenings
– Check that all wheel fastenings (4) are se-
curely fastened and retighten as necessary.
– Observe the relevant torques; see section
entitled "Maintenance data table".
Servicing the battery
NOTE
Battery maintenance is carried out in accord-
ance with the battery manufacturer's operating
instructions.
1
4
7321_003-112
Maintenance
5
Preserving operational readiness
340 57348011850 EN - 08/2020 - 12
To Next Page
Loading...
