STILLE imagiQ2 - Intended Use; Detailed Description; Intended Conditions of Use; Operating Principle

9
Stille imagiQ2
TM
user manual Overview
n
Overview
Intended use
imagiQ2
TM
is intended to be used by trained medi-
cal personnel’s for positioning and supporting of
patients before, during and after human surgery in
operating rooms. It can be used for general open
surgery but is suitable for minimally invasive vascular
surgery e.g. endovascular and cardiovascular sur-
gery.
Because the table top is made of translucent car-
bon-fiber it has a high degree of transparency of
X-rays. The table is designed to fit well together
with a C-arm for fluoroscopic procedures.
n The table is not suitable for infants.
n Intended medical indication:
Minimal invasive surgery
n Intended patient population:
Max. 225 / 300 kg - 496 / 661 Lbs patient
weight (depending on model)
n Intended part of the body interacted with the
device:
Skin tissue
n Not intended for use during brain surgery
n Intended user profile:
Trained medical personnel’s
Intended conditions of use
n To be used in operating theatres/rooms
n Temperature +10°C to +40°C (50°F to
104°F)
n Humidity 30% - 75%.
n Atmospheric pressure 700hPa - 1060hPa
n Cleaned and disinfected before use
Operating principle
n A battery operated mobile surgical operating
table intended to support and positioning
patients during surgical and examination proce
dures.
Least favorable working condition
The table is loaded with max safe work load. opera-
tion conditions, off center and the column all the
way up.
Essential performance
Essential performance according to EN 60 601-
2-46: Essential performance of the imagiQ2 table
is the Trendelenburg function. The function can be
activated by the use of the hand control and can
manually be achieved as an emergency function in
cases of power failure.
Potential equalization
The potential equalization conductor is the zero poten-
tial connector.
Detailed description
1. The table top is made of translucent carbon fibre
composite. Accessory rails run along 2/3 of the
table top. Static electricity is discharged from
the bottom of the mattress via the grounding
rails on the upper surface of the table top.
2. The mattress is made of what is known as ”Slow
Recovery” material, to minimise pressure sores
on patients during long operations.
3. The pan handle is a manoeuvring function allow-
ing panning of the table top. The handle normally
remains in a locked position on the accessory rail
Two pan handles can be used simultaneously
to maneuver the True Free Float™.
4. Connections. The column contains connections
for the pan handle and hand controls and a RED
connector for special imagiQ2 accessories.
5. Hand control manages the hydraulic movements
of the table. Normally, the hand control is sus
pended on the table top accessory rail.
6. Safety control cover holds the emergency
operation control and safety hand control.
7. Connection panel located on the back of the
base, which is the main interface for connectors
for mains supply, main fuse and connector for
foot control (optional).
7. 1 LAN
7.2 Foot control
7.3 USB port
7.4 Quick-Stop / Main switch: Which also
serves as an quick shut-off device.
7.5 Potential equalization connector (on back
side of the base).
7. 6 Applians inlet, NOTE The main switch
must be turned “ON” when charging the table.
8. Retractable wheels, park the operating table.
9. Side protective covers, protect the inside of the
table.
10. Connector, hand control. Extension cable for
connecting hand control at opposite end of
table.