Need help?Do you have a question about the STL K-FORCE TOW 55 and is the answer not in the manual?
General| Brand | STL |
|---|---|
| Model | K-FORCE TOW 55 |
| Category | Lighting Equipment |
| Language | English |
Read manual, test daily, ensure signal visibility, obey laws, proper wiring and mounting are vital.
Avoid airbag areas, use secure mounting, ground connections, and protect wiring from heat/moving parts.
Identify all included parts like light bar, switch box, brackets, screws, bolts, and wiring harness.
Understand automotive electronics, avoid staring at LEDs, use proper cleaning methods, and protect wiring.
Bench test units, check LED functionality, flash patterns, memory, and physical damage before installation.
Clean with water and soft cloth; avoid car washes and pressure washers. Address lens yellowing.
Details wire colors for positive, negative, forward/rear lights, full 360°, flash pattern, and take down/alley lights.
Details wiring for stop/turn signals and auxiliary functions.
Lists voltage, amps, optic type, LED count, cable lengths, and flash patterns.
Explains operation of slide switch and buttons for light bar functions.
Instructions for wiring and connecting extension cables to the light bar harness.
Included adjustable brackets for flat roof contact.
Included brackets for attaching to vehicle via pre-drilled holes.
Optional brackets for vehicle-specific mounting.
Optional mount using main bolt through stud mount.
Optional mount for headache racks, direct or sandwiched.
Comprehensive list of all flash patterns available for the light bar.
Instructions for toggling Steady Burn and Random pattern modes.
Details non-volatile memory recall and pattern setting via control box or wire.
To Next Page
