3 | Product description
12
07/2023 | ID 443360_en.00
Feature Description
Transport/storage surrounding temperature −10 °C to +50 °C
Surrounding operating temperature 0 °C to +40 °C
Installation altitude ≤ 1000 m above sea level
Notes
In order to prevent corrosion damage and damage to the shaft seal rings, protect the drive from the following influences:
§ Environments with harmful oils, acids, gases, vapors, dust or radiation
§ Extreme temperature fluctuations with high humidity
§ Condensation or icing
§ Strong UV radiation (e.g. direct sunlight)
§ Presence of salt spray
§ Sparks
In potentially explosive atmospheres, only gear units in an explosion-proof design in accordance with (ATEX) Directive
2014/34/EU may be used. Separate documentation applies to the explosion-proof design.
3.7 Other product features
Other features of gear units in the standard design can be found in the following table.
Feature Description
Maximum permitted gear unit temperature (on the surface
of the gear unit)
≤ 90°C
Paint Black RAL 9005
Lubricant Synthetic; for specification and quantity, see nameplate
Ventilation Gear housing closed on all sides, no ventilation provided
Weight See order documents
Protection class IP65
With a geared motor, keep in mind that the motor protection class may be lower.
3.8 Additional documentation
You will find more information about the product at http://www.stoeber.de/en/downloads/. Enter the ID of the
documentation in the Search... field.
Product combination Catalog title ID
Gear unit + MB motor adapter with brake ServoStop servo gear units with brake 443234_en
Gear unit + ME/MEL/MF/MFL motor adapter Servo gear units 443054_en
Gear unit + EZ synchronous servo motor EZ synchronous servo geared motors 442437_en
If you have questions about your drive that are not answered by this documentation, please contact STOBER Service
(Service [}27]).
To Next Page
Loading...
General