STONEX S850A User Manual

STONEX S850A
GNSS Receiver
User Manual
Jan 2020 - Ver.1 - Rev.1
www.stonex.it

STONEX S850A Specifications

General

Receiver Type	GNSS Receiver
GPS	Yes
GLONASS	Yes
BeiDou	Yes
Galileo	Yes
QZSS	Yes
SBAS	Yes
Internal Memory	8 GB
Tilt Sensor	Yes
IMU	Yes
Battery Life	Up to 10 hours
Waterproof/Dustproof	IP67
Velocity Accuracy	0.03 m/s
Time Accuracy	20 ns
Humidity	95% non-condensing
Channels	800
Positioning Accuracy RTK	H: 8 mm + 1 ppm; V: 15 mm + 1 ppm
Data Format	CMR, CMR+
Communication	Bluetooth, Wi-Fi, 4G
Operating Temperature	-40°C to 65°C
Interfaces	Bluetooth, Wi-Fi

Summary

Introduction

1. Receiver appearance

1.1 Front view

Describes the indicators and buttons on the front of the receiver, including their status.

1.2 Bottom view

Details the connectors and ports on the bottom of the receiver, explaining their function.

2. Web Interface

2.1 Status

Displays the current state of the receiver, including position and data link status.

2.2 Settings

Allows configuration of working mode, satellite settings, device parameters, and logs.

2.3 Download

Provides downloads of raw data and backup data.

2.4 Management

Allows firmware upgrade, device registration, password modification, and disk formatting.

2.5 Set the language

Allows selection of the user interface language from seven available options.

3. Basic operation

3.1 Power on receiver

Instructions for powering on the receiver using the power button.

3.2 Power off receiver

Instructions for powering off the receiver using the power button.

3.3 Model view and switch

Describes how to view and switch the receiver's working mode and data link.

3.4 Receiver self-check

Explains how to perform a self-check on receiver modules like GNSS, radio, and sensor.

3.5 Insert SIM card

Details the procedure for inserting a SIM card into the receiver before powering on.

4. Accessories

4.1 Carrying case

Shows the external appearance of the transport container for the receiver.

4.2 Standard accessories

Lists standard accessories like power adaptor, charging cable, and data cable.

5. Technical specification

Appendix 1: Default radio configuration

Appendix 2: Copyrights, warranty and environmental recycling

Appendix 3: Safety Recommendations

Warnings and Cautions

Provides information to minimize risks of personal injury and damage to property during use.

Wireless Module Approval

Discusses regulations and country-specific requirements for wireless module operation.

Instrument Approval

Covers technical features related to electromagnetic emissions and interference compliance.