Need help?Do you have a question about the STONEX S980A and is the answer not in the manual?
General| Type | GNSS Receiver |
|---|---|
| Frequency | L1, L2, L5 |
| Accuracy (RTK) Horizontal | 8 mm + 1 ppm |
| Accuracy (RTK) Vertical | 15 mm + 1 ppm |
| Accuracy (Static) Vertical | 5 mm + 0.5 ppm |
| Data Update Rate | Up to 20 Hz |
| Operating Temperature | -40°C to +65°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 95% non-condensing |
| Internal Memory | 16 GB |
| Tilt Sensor | Yes |
| IMU | Yes |
| IP Rating | IP67 |
| Weight | 1.2 kg |
| Signal Tracking | GPS, GLONASS, GALILEO, BEIDOU |
| Communication | Bluetooth, Wi-Fi, 4G LTE |
Describes the components and indicators on the front of the receiver.
Details the connectors and ports located on the bottom of the receiver.
Shows the top view of the GNSS receiver.
Shows the back-side view of the GNSS receiver.
Displays device serial number, power level, working mode, satellites, and status.
Allows viewing satellite sky plot, satellite table, and setting cutoff angle.
Configures parameters for static surveys, including point name, antenna height, and sample interval.
Enables downloading, deleting, and editing observation files and ephemeris.
Configures datalinks (UHF, Network, External, Bluetooth) for rover operation.
Configures parameters specific to base station operation, including data type and position.
Manages satellite systems, cutoff angle, and RTK modes (NORMAL, SureFix).
Configures time zone, direct link mode, sensor, speaker, and NMEA output.
Allows downloading backup data, configuration sets, and device logs.
Displays receiver model, serial number, firmware/hardware versions, and module information.
Handles firmware upgrades, device registration, password settings, and factory resets.
Procedure for upgrading the receiver's firmware.
Process for registering the receiver with an authorization code.
Option to select the user interface language.
Instructions for powering the GNSS receiver on and off.
How to check and change the receiver's current working mode.
Performs a diagnostic check of the receiver's modules, including via touch display.
Step-by-step guide for inserting a SIM card into the receiver.
Shows current receiver status, solution quality, and battery level.
Interface for selecting Static, Base, or Setting modes.
Configures sample interval and cutoff angle for static surveys.
Options to start a base in Radio or External mode.
Adjusts screen light time, initiates self-check, or restores factory settings.
Details enabling and configuring the IMU sensor using Stonex Cube-a.
Guides the IMU sensor initialization process for accurate measurements.
Checks accuracy and calibrates the IMU sensor.
Shows the appearance of the transport container.
Lists the included accessories with part numbers.
Details satellite tracking, L-Band, channels, and memory.
Lists accuracy for Static, Code Differential, SBAS, and RTK modes.
Describes the capabilities of the integrated GNSS antenna.
Specifications for the 2-5 Watt internal radio.
Lists supported LTE, UMTS, and GSM bands.
Details I/O connectors, Bluetooth, Wi-Fi, and Web UI.
Information on battery, voltage, and operating time.
Provides dimensions, weight, temperature, and durability ratings.
Alerts about health, property, and equipment risks during operation.
Guidelines for operating wireless modules and country-specific regulations.
Covers electromagnetic compatibility and technical features for approval.
General warnings and safety distances for antenna installation.
Precautions for human exposure to radio frequency electromagnetic energy.
Information on radiated output power and safe usage of Bluetooth/WiFi.
Precautions for safe installation of antennas for internal radios.
To Next Page
