EasyManua.ls Logo

STONEX S9III Plus User Manual

STONEX S9III Plus
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Author: AM-Ver.1-Rev.4 CS (12/04/2014)
User Manual
STONEX S9III Plus
GNSS Receiver
www.stonexpositioning.com
Question and Answer IconNeed help?

Do you have a question about the STONEX S9III Plus and is the answer not in the manual?

STONEX S9III Plus Specifications

General IconGeneral
FrequencyL1, L2, L5
Waterproof/DustproofIP67
Tilt SensorYes
Signal TrackingGPS, GLONASS, Galileo, BeiDou, QZSS, SBAS
RTK Positioning Accuracy (Horizontal)8mm + 1ppm
RTK Positioning Accuracy (Vertical)15 mm + 1 ppm RMS
Static Positioning Accuracy (Vertical)5mm + 0.5ppm
Data Logging RateUp to 50 Hz
CommunicationBluetooth, Wi-Fi, 4G
PortsUSB-C
BatteryLi-ion

Summary

1. Introduction to S9III PLUS

2. S9III PLUS Mainframe Overview

2.1. Interfaces and Ports

Describes the various ports and connectors available on the S9III PLUS mainframe for connectivity.

2.2. Battery Housing and Indicator LEDs

Explains the battery housing, SIM/SD slots, and the meaning of indicator LEDs for instrument status.

3. S9III PLUS Standard Accessories

3.1. Cases, Power Supply, and Antennas

Covers receiver cases, power supply components (batteries, charger), and compatible antennas.

3.2. Cables and Other Accessories

Lists communication and power cables, plus additional accessories like poles and brackets.

3.3. Controllers

Discusses compatible controllers, specifically the STONEX S4 controller for the S9III PLUS.

4. S9III PLUS Configuration and Setup

4.1. Base and Rover Installation

Provides step-by-step instructions for installing the receiver in base and rover configurations.

4.2. LED Operation and Antenna Height

Explains indicator LED meanings and essential methods for measuring antenna height accurately.

5. STONEX® Assistant Software Usage

5.1. Starting and Connecting the Assistant

Guides on connecting the S9III PLUS to a PC and launching the STONEX Assistant software.

5.2. Software Settings and Parameters

Explains how to access and configure various settings within the STONEX Assistant software.

5.2.1. Static and Dynamic Survey Setup

Details parameters for static surveys and dynamic modes (Base/Rover) in the Assistant.

5.2.2.1. Base Coordinates Setting

Explains how to set base coordinates manually or automatically within the Assistant.

5.2.3. Datalink Options Configuration

Describes the different datalink options (Network, UHF, External, Bluetooth) for data correction.

5.2.4. NMEA Output String Setup

Details how to configure the output of NMEA messages and their frequencies.

5.3. Importing and Managing Data

Explains how to download raw data files from the receiver to a PC and manage them.

5.4. Serial Port Forwarding

Describes the function for direct configuration of GNSS OEM, UHF, and GPRS modules.

5.5. Registering and Updating Firmware

Guides on registering license codes and updating the receiver's firmware via the Assistant.

6. Appendices and Supplementary Information

Appendix 1: Default Radio Settings

Provides the default radio frequencies for the internal UHF radio channels.

Appendix 2: Technical Specifications

Lists detailed technical specifications for the STONEX S9III PLUS GNSS receiver.

Appendix 3: Safety Recommendations

Provides essential safety warnings, cautions, and guidelines for using the equipment.

Instrument Approval and Antenna Safety

Antenna Installation Warning

Provides critical warnings and safety distances for installing antennas with the transmitter.

Rechargeable Lithium-ion Batteries Safety

Appendix 4: Copyrights, Warranty, and Recycling

Copyrights and Trademarks

Lists the official trademarks and copyrights associated with STONEX products and software.

Limited Warranty Terms

Outlines the complete terms and conditions of the limited warranty agreement for STONEX products.

Accessories Warranty and Service Procedures

Service and Environmental Procedures

Details repair procedures and guidelines for product recycling and disposal.

Related product manuals