Stonex S9III Plus GNSS Receiver – User Manual 19
3.4. Cables
Receivers cables (LM.GK205.ABL)
This is a multi-function communication cable: it is used for connecting receiver
and computer and, through Stonex Assistant, for transferring the static data,
updating the firmware and the license.
Fig. 3.10 - Multi-function communication cable
Auxiliary cables (LM.GK185.ABL+ LM.GK224.AAZ)
External power supply cables (LM.GK185.ABL+ LM.GK224.AAZ) can be ordered
and used to connect an external battery (red and black clips) to the receiver
(small 5-pin LEMO):
Fig. 3.11 - External power supply cables
3.5. Other accessories
The other accessories are: 2.45 m retractable pole, two kind of brackets
depending on the controller, tribrach with plummet, tripod (wood or
aluminum, with quick or twist clamps), connector between receiver and
tribrach, and measuring tape.
To Next Page
Loading...
