Need help?Do you have a question about the STONEX S900+ and is the answer not in the manual?
General| Frequency Bands | L1, L2, L5 |
|---|---|
| Tilt Sensor | Yes |
| E-Bubble | Yes |
| Battery Life | Up to 10 hours |
| Ingress Protection | IP67 |
| Signal Tracking | GPS, GLONASS, Galileo, BeiDou, QZSS |
| RTK Accuracy Horizontal | 8 mm + 1 ppm |
| RTK Accuracy Vertical | 15 mm + 1 ppm |
| Static Accuracy Vertical | 5 mm + 0.5 ppm |
| Communication | Bluetooth, Wi-Fi, 4G LTE |
| Weight | 950 g (including battery) |
Details the indicators and buttons on the front of the receiver.
Details the connectors and slots on the bottom of the receiver.
Displays receiver status, working mode, satellites, and coordinates.
Shows tracked satellites, constellations, elevation, and azimuth data.
Configures raw data recording, point naming, antenna height, and PDOP threshold.
Allows downloading, deleting, and converting log files (Raw, Rinex, NMEA, selftest).
Configures RTK datalink for rover mode, recognizing correction formats.
Configures UHF radio modules, frequency, channels, and protocols for rover operation.
Configures internet connection via SIM card or Wi-Fi for rover mode.
Configures external serial port baud rate and manages Bluetooth datalink for rover.
Sets up RTK corrections for base mode, including data formats and position.
Configures UHF radio modules, frequency, channels, and protocols for base operation.
Configures internet connection via SIM card or Wi-Fi for base mode.
Configures external serial port baud rate and manages Bluetooth datalink for base.
Selects constellations to track and adjusts satellite cut-off angle.
Configures time zone, direct link mode, sensor refresh rate, and serial port baud rate.
Manages configuration sets, uploads configurations, and accesses system logs.
Displays hardware, firmware, serial numbers, and battery status.
Guides on how to upgrade receiver, GNSS, radio, and 3G module firmware.
Explains device registration and changing passwords for WebUI/Wi-Fi.
Provides functions for formatting disk, self-testing, restoring settings, and restarting.
Highlights benefits like fast surveys, quick initialization, and tilt compensation.
Details enabling pole tilt correction and setting tilt angle limits.
Guides through the mandatory calibration process for the IMU sensor.
Explains the steps for magnetic and GNSS-based initialization of the IMU.
Details satellite signals, positioning rates, accuracy, and RTK initialization.
Covers internal modem bands, communication interfaces, and navigation outputs.
Details battery, voltage, working time, dimensions, weight, and environmental ratings.
Lists the default frequency assignments for UHF channels.
Provides protocol details for TRM101 radio module.
Lists protocol and modulation types for TRM121, fixed and hopping frequencies.
Lists STONEX trademarks and copyrights.
Announces the release date of the user guide.
Outlines the terms and conditions of the product's limited warranty.
Details shipping, DOA returns, and firmware/software/out-of-warranty policies.
Disclaims warranties, limits liability, and provides environmental recycling guidelines.
Advises on safety risks and precautions during equipment use.
Discusses regulations and approvals for wireless modules in different countries.
Covers technical features related to electromagnetic emissions and approvals.
Provides warnings and safety distances for antenna installation and RF exposure.
Advises on antenna gain limits and RF exposure precautions for internal radios.
Details precautions for handling damaged or intact lithium-ion batteries.
To Next Page
