STONEX S900+ - Introduction to the GNSS Receiver

Stonex S900
+
GNSS Receiver – User Manual 3
1. Introduction
This document is the user guide for S900
+
and it’s intended to introduce how to use the receiver correctly.
S900
+
is a multiple-frequency receiver designed for GNSS surveying applications. It can work as a base station
or as a rover, the configuration can be switched freely whenever and wherever is needed, offering maximum
versatility in the system configuration to meet your specific requirements. At the same time, the S900
+
receiver
can be upgraded easily to continually meet new demand.
The integrated design of the receiver makes the S900
+
only 1.3 kg, which is light and portable. The internal
antenna supports signals from GPS, GLONASS, Beidou, Galileo, and QZSS satellite systems.
The use of tilt correction doesn’t require calibration at every start-up thanks to the integrated Sensor Fusion
system. In this way, the surveyor can start to record points after a very quick initialization after obtaining a
Fixed solution.
S900
+
GSM modem is enabled to work with Worldwide LTE, UMTS, and GSM based networks.
The Key Features of S900
+
are:
• Multi-frequency and multi-constellation satellites reception
• 4G/3G/2G Network connectivity
• 2.1+EDR/5.0 Bluetooth
• Easy configuration using Stonex Cube-a Android application and Web User Interface
• Double removable battery
• Rugged housing
• IP67
• UHF datalink with internal TX/RX 1W radio module (optional)
• Tilt correction IMU sensor (optional)