STONEX S900+ - Firmware Update Procedure

Stonex S900
+
GNSS Receiver – User Manual 28
3.10 Management
The management page contains functions for the correct operativity of S900
+
.
3.10.1 Firmware Update
To update a firmware, select the firmware file using the file explorer (Choose File) then press Submit.
When the file has been decompressed, press Confirm to start the update. The motherboard firmware update
will restart automatically the S900
+
.
Attention! Do not turn off the receiver during the update.
Once the firmware updates are completed perform a Factory Reset.
Attention! Use only firmware files provided by your local reseller.