STONEX S900+ - Configuring Working Modes; Rover Mode Datalink Setup

Stonex S900
+
GNSS Receiver – User Manual 12
3.5 Working Mode
This page contains all the settings to set up RTK datalink
3.5.1 Rover
In Rover mode, S900
+
automatically recognizes the RTK corrections format between:
• RTCM 3.2
• RTCM 3.0
• RTCM 2.3
• CMR+
• CMR
• DGPS
It’s necessary to correctly set the datalink between:
• UHF
• Network (SIM, Wi-Fi)
• External (Serial)
• Bluetooth