Need help?Do you have a question about the STONEX S9 GNSS and is the answer not in the manual?
Describes the physical structure and components of the S9III mainframe.
Details the various ports and connectors available on the S9III mainframe.
Explains how to install the battery and SIM card into the S9III receiver.
Describes the function and status of the indicator LEDs and keys on the S9III mainframe.
Details the different types of cases included for the S9III receiver (Rover and Base).
Explains the batteries, charger, and adapter included for the S9III receiver's power.
Describes the UHF and GPRS/GSM antennas used with the S9III receiver.
Details the multi-function communication cable and auxiliary cables for the S9III receiver.
Lists various other accessories like poles, brackets, tribrach, and measuring tape.
Describes the Getac PS236 controller, often bundled with the S9III.
Guides on how to set up the S9III receiver as a base station and a rover.
Explains how to configure the S9III receiver's working mode using the device's keys.
Details the standard operation and meaning of the indicator LEDs in different modes.
Provides instructions on how to accurately measure the antenna height for surveying.
Guides on the procedure to download static data from the S9III receiver to a PC.
Explains how to register the S9III receiver using a license code.
Instructions on how to connect and start the Stonex Assistant software on a PC.
Details how to use the Setting window in Stonex Assistant to configure receiver parameters.
Explains the configuration settings for static data surveys using Stonex Assistant.
Details the parameters for configuring dynamic (RTK) working modes in Stonex Assistant.
Guides on setting base coordinates manually or automatically within Stonex Assistant.
Explains how to select different data link options for differential corrections.
Details the configuration for network (CORS) data link using Stonex Assistant.
Explains how to configure the UHF radio data link settings in Stonex Assistant.
Guides on configuring an external radio data link via Stonex Assistant.
Explains how to configure the Bluetooth data link for RTK exchange in Stonex Assistant.
Describes how to configure NMEA output messages in Stonex Assistant.
Details how to import raw data files from the receiver to a PC using Stonex Assistant.
Explains the serial port forwarding function for advanced users in Stonex Assistant.
Guides on how to register the receiver's license code using Stonex Assistant.
Instructions for updating the receiver's firmware using Stonex Assistant.
Lists the technical specifications for the GNSS module of the S9III receiver.
Details the static, RTK, and other accuracy specifications for the S9III receiver.
Lists connectors, cables, and communication protocols supported by the S9III.
Provides technical details about the internal radio module of the S9III receiver.
Details the specifications of the GPRS/GSM communication module.
Specifies the power input requirements and voltage for the S9III receiver.
Lists the physical dimensions, weight, and environmental ratings of the S9III receiver.
Lists copyright information and trademarks associated with the STONEX S9III.
Outlines the terms and conditions of the limited warranty for the STONEX S9III.
Details the procedure for returning instruments that are Dead On Arrival.
Specifies the warranty coverage for the firmware and software of the S9III receiver.
Explains the policy and fees for repair services outside the warranty period.
Provides guidelines for the proper disposal and recycling of the S9III receiver and its packaging.
To Next Page
General
