configuration file), which are files with raw GPS measures. By checking only one box or more
at the left of each file, you can select it for download operations.
You can also choose to convert the downloaded file into RINEX format by checking at box
“Rinex format” in the Option area on the top of the page. Checking at “Delete Source” you can
enable the automatic erase of the selected files after download on the PC memory.
Using the “Download” button, at the bottom of the form, you can save the marked files on your
PC, in the folder you prefer. In this section you can also modify the value of the antenna height
of the receiver used during survey.
V. 4 Serial Port Forwarding
This function is for advanced users and technical support only.
Port forwarding allows the configuration of the GNSS OEM module, UHF module and GPRS
module directly. This functionality is valid only for DB9 serial port connection from 5-pin Lemo.
Click on “Serial Port Forwarding”: a new window is opened as in Fig. 5.17.
To Next Page
Loading...
