Need help?Do you have a question about the STONEX S9III GNSS and is the answer not in the manual?
General| Type | GNSS Receiver |
|---|---|
| GPS | Yes |
| GLONASS | Yes |
| Galileo | Yes |
| BeiDou | Yes |
| QZSS | Yes |
| SBAS | Yes |
| RTK Accuracy Horizontal | 8 mm + 1 ppm |
| RTK Accuracy Vertical | 15 mm + 1 ppm |
| Static Accuracy Horizontal | 3 mm + 0.5 ppm |
| Static Accuracy Vertical | 5 mm + 0.5 ppm |
| Data Recording Rate | Up to 20 Hz |
| Battery Life | Up to 10 hours |
| IP Rating | IP67 |
| Communication | Bluetooth |
| Operating Temperature | -40°C to +65°C |
| Initialization Time | < 10 s |
Explains how to install the battery and SIM card into the receiver.
Covers the function of indicator LEDs, keys, and initial instrument setup.
Provides instructions for installing the receiver in base and rover configurations.
Explains the function of the power (I) and function (F) keys on the receiver.
Details how to set up the instrument for base and rover modes.
Covers downloading raw data from the receiver and converting it to RINEX.
Allows configuration of receiver parameters via the Assistant software.
Instructions on how to update the receiver's firmware.
Details the GNSS module capabilities and signal tracking.
Outlines the accuracy performance for static and RTK modes.
To Next Page
