Need help?Do you have a question about the STONEX S10A and is the answer not in the manual?
Details the front panel interface with keys and indicators.
Explains the LEMO ports for power, data, and antenna connections.
Describes the battery housing, SIM slot, SD slot, and reset key.
Lists batteries, charger, and adapter included with the receiver.
Details UHF and GSM/WCDMA/EVDO antennas, including gain.
Describes communication and power supply cables for the receiver.
Lists poles, brackets, tribrach, tripod, and other useful tools.
Introduces the optional controller for the S10A GNSS receiver.
Step-by-step guide for setting up the receiver as a base or rover.
Explains how to configure working modes and data link options.
Instructions for transferring static data from the receiver to a PC.
Guide to establishing a Wi-Fi connection and logging into the Web UI.
Details how to set system mode, cutoff angle, and other device parameters.
Overview of Rover mode settings.
Configuration details for UHF data link in Rover mode.
Configuration details for Network (GPRS) data link in Rover mode.
Configuration details for External data link in Rover mode.
Overview of Base mode settings.
Configuration details for UHF data link in Base mode.
Configuration details for Network (GPRS) data link in Base mode.
Configuration details for External data link in Base mode.
Allows customization of language, time zone, sensors, and storage.
Enables selection and configuration of NMEA output sentences.
Step-by-step guide for calibrating the tilt sensor and electronic bubble.
Lists default UHF radio channels and frequencies for the S10A.
Provides solutions to common issues encountered with the receiver.
Comprehensive list of the S10A's hardware and performance specifications.
Outlines terms, conditions, warranty, and disposal guidelines.
Important safety precautions for using the GNSS receiver and its modules.
To Next Page
General
