Stonex S10A GNSS Receiver – User Manual 33
From this menu, the User can select the language used by the WebUI, the
'time’ compared to the meridian GMT, toggle the "speaker", select the
memory to save the raw data (internal memory or SD card), set the size of
the time zone, change the refresh rate of the sensors. Other advanced
functions such as direct connection to the internal modules OEM (for experts
only) can be set with this menu
Use the SAVE button to save the configuration.
5.6 NMEA Settings
Here you can activate the NMEA sentences that you want to carry out on
lemo 7.
You can select the refresh rate of each string on 'output lemo. There are also
proprietary string where are encoded data signal to noise ratio.