STONEX S10A User Manual

Stonex S10A GNSS Receiver – User Manual 30
5.4. Base Mode
Used to set the receiver S10A in ‘BASE’ mode. The Base can be connected to
the rover through different data link.
5.4.1. Option UHF
For connections through UHF radio channel.
It is possible to set the automatic start of the Base (S10A Base automatically
broadcasts the differential corrections without any action by the operator ),
select the type of differential correction (RTCM3.x, RTCM2.x, CMR, etc).
Are requested:
 The name of the Base (station) point
 the max. value of PDOP allowed to record a point inside the raw
data file
 the geographical coordinates of the point where there is located
the base (function accessible by selecting the check box "Repeat
Position"
 the frequencies of radio channels.
Finally the broadcasted power and the radio protocol to use must be
selected.

STONEX S10A Specifications

General

Brand	STONEX
Model	S10A
Category	Receiver
Language	English