EasyManuals Logo

STONEX S10A User Manual

STONEX S10A
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Stonex S10A GNSS Receiver User Manual 3
If you are not familiar with GNSS technology,
we suggest you read a specific book in order
to understand in a best way the contents of
this manual. Any way you can ask for any
technical support by sending an email to our
address support@stonex.it or contact your
local dealer.
2. S10A panel description
STONEX S10A is a light 14 x 14 cm GNSS unit; It is equipped with a high
accuracy triple frequency receiving antenna, Bluetooth© and Wi-Fi, UHF
transceiver radio modem (option).
The unit is divided into three parts: the upper cap, the rubber loop and the
main body. The upper cap protects the integrated GNSS antenna, the rubber
loop has the function of softening possible shocks or falls. In the front of the
main body.
On the front panel there are 2 keys and 7 indicators, on the back there are
the battery house, SIM slot, SD slot and reset key.
2.1. S10A smart panel
From the smart panel is possible to check at any time the status of the S10A.
The following figure shows it and the meaning of the leds.
Fig. 2.1 - S10 GNSS: the front panel

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the STONEX S10A and is the answer not in the manual?

STONEX S10A Specifications

General IconGeneral
BrandSTONEX
ModelS10A
CategoryReceiver
LanguageEnglish

Related product manuals