STONEX S10A - Declination (Compass) Calibration

Stonex S10A GNSS Receiver – User Manual 40
 Points 6.1.1 and 6.1.2 DO NOT require the receiver in FIXED status.
6.1.3 Declination (compass) calibration
The Declination operation accuracy has a great influence on the accuracy of
the tilted measurements.
 Check the FIXED status of the receiver if not previously activated;
 Mount the S10A on the pole (tripod cannot be used for this step of
the calibration) at a minimum height of 2 m
 Position MUST BE FIXED!
1. Click on Calibrate…
2. …and confirm the message
3. Click on Close.