STONEX S10A - Page 40

Stonex S10A GNSS Receiver – User Manual 39
Slowly rotate the S10A (the rotation would be last from 1 to 2 minutes) as
shown on the display; check at any time that pole bubble is centered.
A green circle shows the quality of the rotation. After the rotation is
completed (360°) a beep indicates that this operation is finished.
Slowly rotate the S10A (the rotation would be last from 1 to 2 minutes) as
shown on the display; check at any time that pole bubble is centered. A
green circle shows the quality of the rotation. After the rotation is completed
(360°) a beep indicates that this operation is finished.
Remove the S10 from the mini rotary
table and mount it on the pole.
Click on Record Horizontal