STONEX S10A - Rover Mode: UHF Option

Stonex S10A GNSS Receiver – User Manual 28
The User can also set data for advanced configuration of the radio:
 Radio Channel : 1 to 8
 Radio Protocol: Must be consistent with TrimTalk, South9600,
South19200, Trimmark3, PCC EOT.
 Channel Spacing: 12.5 or 25Khz.
 FEC: Forward Error corrector.
. Use the "SAVE" button in the lower part of the screen to save the
configuration.
5.3.2. Option Network
The Network option is used to set the configuration parameters of the 3G
GPRS network connection, such as the type of connection you want to run
(eg NTRIP, CSD). NTRIP requires to input APN, Caster Address, Port number,
Mount Point, user ID and password of the provider of differential corrections.
CSD option allows to enter the phone number of the SIM card inserted in the
receiver used as a "base", which will connect to the rover (direct call function
base-rover).