Chapter III: S9III standard accessories
On the basis of the configuration chosen (base or rover) some of these accessories are included
in the receiver bundle.
III.1 The case of S9III
There are two kinds of S9III cases: Rover case and Base case. The inner layout of the Base case
and Rover case is different.
Base case contains also the basement and tribrach for fixing the base on a tripod and a 40 cm
pole for put the base higher, while Rover case included the bracket for the controller. You can
distinguish them from nameplate.
Fig. 3.1 - S9III case
To Next Page
Loading...
