a) Name of APN provider provider of the RF Network connection.
b) User and Password (normally not required).
c) NTRIP setting parameters like IP address of CORS provider, Port Address, Type
of Mount Point, User Name and Password of the user.
The “GGA Upload” input windows provide the interval of NMEA GGA string upload, this string
contains the rover coordinates that must be sent to the CORS or base.
Click on “OK” button to confirm your entry.
V. 2.3.2 UHF Radio
Choose this option when you are taking differential corrections from your GPS Base.
If you select UHF from the Scroll box and click the “Setting” Button a new form will open,
where you can introduce following data: Frequency settings, Station name, Channel number,
Protocol and Channel Spacing , as you can see in Fig 5.12.
To Next Page
Loading...
