EasyManua.ls Logo

STONEX S900+ - Satellite and Device Settings; Satellite Tracking Configuration; General Device Settings Configuration

STONEX S900+
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Stonex S900
+
GNSS Receiver User Manual 22
3.6 Satellite Settings
From this page, it’s possible to choose which constellation to track. Like on the Satellite page, it’s possible to
change the satellite cut-off angle.
RTK timeout is the number of seconds that must pass without receiving RTK correction to consider the
connections lost, and so revert the solution to single.
SBAS enables or disables the use of SBAS corrections. We suggest not using SBAS correction while working as
a base or together with other correction types.
3.7 Device Settings
This page contains other configuration option for S900
+
, the first section include:
Time zone: set the time zone to change the Local time as shown in the Dashboard
Direct Link Mode: Service option, do not use
Sensor: set the refresh rate of the IMU sensor
7-pin Serial Port Baud Rate

Related product manuals