STONEX S900+ - Page 24

Stonex S900
+
GNSS Receiver – User Manual 23
Hardware Configuration section contains:
• Speaker: enable/disable the voice messages
• Power on automatically when connected 5-pin cable: automatically turn on the S900
+
when the
power supply is received on 5-pin port
• Power off automatically when disconnected 5-pin cable: automatically turn off the S900
+
when the
power supply is no longer received on 5-pin port
• Network Enable: Enable 2G/3G/4G network
• Wi-Fi Hotspot Share Network: Internet connection sharing with devices connected to S900
+
Wi-Fi
hotspot
• SD Card Priority Storage: if an SD card is inserted the log files will be saved in it instead of using the
internal memory. Also, change the memory information shown in Information and Download Raw
Data pages