STONEX S900+ - Base External Serial and Bluetooth Datalinks

Stonex S900
+
GNSS Receiver – User Manual 21
3.5.2.3 External (Serial)
By selecting External, the only setting necessary is the external port baud rate, it must match the receiver baud
rate. The serial port used for this datalink is the 5-pin port.
The baud rate available are:
• 9600
• 19200
• 38400
• 57600
• 115200
3.5.2.4 Bluetooth
Using Bluetooth datalink allows the transmission of the corrections via Bluetooth to another device (ex. SR02
external radio). It’s possible to scan for nearby Bluetooth devices, selecting a voice from the scan results will
automatically complete the Serial number and Mac address field