STONEX S9III Plus - 5.4. Serial Port Forwarding

Stonex S9III Plus GNSS Receiver – User Manual 47
Port forwarding allows the configuration of the GNSS OEM module, UHF
module and GPRS module directly. For using this functionality you need to
order a cable DB9 serial port connection from 5-pin Lemo (see below Fig. 5.24).
Fig. 5.24 – Cable for serial port forwarding
Please note that unintended commands might affect the operation of the
receiver.
Connect both USB cable to 7-pin LEMO and serial cable to 5-pin LEMO, then
connect receiver to Assistant, click on “Serial Port Forwarding”: a new window
is opened as in Fig. 5.25.