STONEX S980A - Sensor Activation and Configuration

Stonex S980A GNSS Receiver – User Manual v1.0
35
8.1 IMU with Stonex Cube-a
8.1.1 Sensor Activation and Configuration
To use the S980A with new IMU technology it’s necessary to enable the feature
in the specific options menu.
Before using the receiver to collect points with the pole tilted, check if the pole
tilt correction functionality has been enabled.
With Stonex Cube-a, follow this path to find the configuration menu:
Configure → System Settings → Sensor Options.
There, enable the Pole Tilt Correction.